Home > Fluke > 789

Fluke 789 Processmeter, 4-20 mA Loop Diagnostics

Brand New
MFG#: 1633984
Processmeter, 4-20 mA Loop Diagnostics
  • Description
  • Datasheets
  • Videos
  • Documents & Manuals
  • Accessories
Fluke 789 Processmeter, 4-20 mA Loop Diagnostics

The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better, the range is extended with the new Fluke 789 - the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less.


Features:
  • AC175 Alligator Clips
  • Four AA 1.5 V alkaline battery (installed)
  • TL71 Safety-Designed Test lead Set
  • Users Manual and Quick Reference Guide
  • 24 V Loop power supply
  • Very large dual display
  • Enhanced backlight with 2 brightness settings
  • 1200 Ohm drive capability on mA source
  • HART mode setting with loop power and a built-in 250 ohm resistor
  • 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
  • Externally accessible fuses for easy replacement
  • Infrared-port to process data in FlukeView Forms (V2.1) software
  • Additional Fluke 789 features:
    • Precision 1000 V, 440 mA True-RMS digital Multimeter
    • 0.1% dc voltage accuracy
    • 0.05% dc current accuracy
    • Frequency measurement to 20 kHz
    • Min/Max/Average/Hold/Relative modes
    • Diode Test and Continuity Beeper
    • Simultaneous mA and % of scale readout
    • 20 mA DC current source / loop calibrator / simulator
    • Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
    • Externally accessible battery for easy battery changes
  • Safety Conformance
    • Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards

 

(800) 366-5240

Free U.S. Ground Shipping*
Chat with a Bell Electronics representative
Bell Electronics NW, Inc.
19725 Russell Road
Kent, Washington 98032 U.S.A.

Telephone: 1-800-366-5240
International: +1-253-395-0707
Fax: 253-395-0808

Cage Code: 1R3V4